Mạch Nạp Hotek e-Link Debugger 8 Bit MCU

Thương hiệu	OEM

Description

The e-Link is an online debug adaptor for Holtek’s new generation of OCDS architecture 8-bit Flash MCUs. Together with the HT-IDE3000 software it allows users to program and debug programs on their target boards.

※The e-Link only supports OCDS architecture 8-bit Flash MCUs.

※For each new e-Link being used for the first time, it must be enabled by using the activation program.

The e-Link also provides an ICP function for 8-bit Flash MCUs. When connected to a PC and when used together with the HOPE3000 software the e-Link can also be used as a low volume engineering programmer for HT8 Flash MCUs.

※The e-Link is not able to support offline programming and is not suitable for volume device programming.

※The e-Link does not yet support programming of the Boot Loader ROM code program. As a result it should not be used for programming application programs which have an ISP requirement such as the HT6XFB5X0.

Product Information:

Dimension: 84mm x 44mm x 13mm
Weight: 91 g
Flat-Cable (e-cable1225A) x 1
Mini USB Cable x 1
e-FPC06A x 1
2×6 Pin Double-Row Male Headers x 1
Important Information x 1
User guide: https://datasheet.lcsc.com/lcsc/1811082120_Holtek-Semicon-C111423_C111423.pdf